Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 06:44

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The bolt then partially travels down the line to your home.

In schematic diagrams this is the symbol for a fuse:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

New Study Reveals the #1 Sleep Mistake That Harms the Brain - AOL.com

There are three different concepts here that are getting confused.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

A Salute to Brian Wilson: Darian Sahanaja on Growing Up on Brian, Then Basking in His Musical Inner Circle for a Quarter-Century - Variety

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

So, the voltage could go up to 500 volts, and the fuse will not open up.

One is “what exactly is in a ‘surge protector’ ? ”

Long, dark 'streaks' spotted on Mars aren't what scientists thought - Live Science

(Dc diagram shown, AC is similar).

At least they know the answer if they wanted it.

An AC voltage/ current source, and an ac inductive load.

How does prayer impact those in need? Is there evidence that God intervenes and improves situations based on our prayers, or is it a psychological belief?

2024–10–14 [Omar Gharbi Omar Gharbi ]

It seems Mohan does not understand the difference between a comment and an Answer.

These are simplified answers to the original question, and does not change anything I wrote above.

‘Black Swan Event’ Could Trigger 25% Drop in Alphabet Stock, Warns Barclays - TipRanks

A fuse is a non-resetable over current circuit protector.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Queens of the Stone Age Announce Autumn 2025 Tour of North America - Pitchfork

He then asserts :

[old diagram got deleted by accident]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Pocket is shutting down, so I switched to a self-hosted alternative - Android Authority

This is where the MOV conducts again, and dissipated the energy.

What is lightning?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Exploding battery fears spark recall of 1.1 million portable chargers - San Francisco Chronicle

The other is “what does a “fuse” do?”

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Seven years later, Nintendo fans beat Switch game even the devs didn’t - Polygon

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

2024–10–16 [ OO OLAOYE OYEBODE ]

One

How physicists used antimatter, supercomputers and giant magnets to solve a 20-year-old mystery - The Conversation

For this case there are devices called Metal oxide varistors (MOV).

Here is a simplified AC power diagram.

But… the neutral is now “floating” because of the 1 ohm resistance.

If you caught a shoplifter at your yard sale, how would you handle it?

[image of Common-mode choke]

He then describes the function of a fuse.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Diddy trial day 24 recap: Sean Combs considered himself the Michael Jordan of sex parties, witness says - ABC News

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

The third is lightning and “how it gets conducted into a home.”

He then describes Rainy Season and Lightning.

How do I come out as queer to my best friend in a funny and stupid way?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

the problem then depends on "how fast does the fuse operate?".

Father, 39, Has 1 Minor Symptom. Then He’s Given 2 Years to Live After 'Devastating' Diagnosis - AOL.com

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

but I think this circuit , shows a few more pieces.

First Sentence:

Edit 2024–10.

These devices are installed between the “hot” and “neutral” and protective ground.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

a photo is worth a thousand words.

It also is a device that limits the change in current flow.

so, what happens?

but this device (an Inductor) … impedes the rapid changes in the current.

what exactly is a ‘surge’ protector?

What does a fuse do?

Upvotes:

eight

I post the exact comment here.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

There are two important concepts here.

This one hit behind the barn.

Because the load is inductive, the current lags the voltage.(by a bit).

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Barnstars:

2024–10–10[John johnson John Johnson ]

This is 'the assistant's answer'

nine

This is where this question deviates from being a 'generic' question, and becomes more specific.

At one ohm, the resistor has a maximum of 1 watt power.

Now when you have a certain ac resistance, then a current flows in a loop.

A circuit breaker is similar, but is resettable.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

This device then solves the entire problem.

But it can get overloaded, and no longer works.